Marmoleum Click Floor Finish - Gallon

In case of accidental damage to Marmoleum Click Topshield top layer, excessive wear or a desire for additional gloss. Use Marmoleum Floor Finish.

Marmoleum Floor Finish is specifically formulated for renovation of the original TopShield finsih, or for use when additional gloss is desired. The environmentally preferable formula of Marmoleum Floor Finish uses the most advanced polymer technology and has eliminated heavy metals making it better for the environment that traditional floor finishes.

Directions:

1. Remove loose dirt and grit by Sweeping, dust mopping or, preferably, vacuuming the floor.

2. Clean the floor with Marmoleum Floor Cleaner following the label directions.

3. Evenly apply two coats of Marmoleum floor finish using a clean , lint free cloth, or a micro fiber mop applicator. If using the same mop that was used for cleaning, it must be thoroughly rinsed and clean. The finish should be applied liberally enough to avoid creating "dry spots" or streaks, but no more. Evenly applied thin coats will produce better results tan one thick coat.

4. Allow a minimum of 45 minutes drying time between coats.

5. Additional coats may be applied if a higher gloss level is desired. Do not apply more than 4 coats in one day. Once your Marmoleum floor has been renovated it shoud be cleaned normally using Marmoleum Floor Cleaner following label directions.

Marmoleum Floor Finish is for Residential use.