Hilway Direct Floor Finish, Satin - 1.33 gal

Hilway Direct Floor Finish, Satin, is a hard-wearing and highly resistant acrylic floor finish for the protection of vinyl, linoleum, rubber, cork and other hard surface flooring for application post installation. This floor finish creates a scuff resistant, durable Satin finish. Available in 1.33 Gallon Size.

Size is equivalent to 5 Liters which is 33% more than standard Gallon Size.

No VOCs. Non-hazardous.

Instructions for Use: 1. Clean floor thoroughly prior to application of finish. 2. Shake finish well before use. 3. Apply length-ways a thin, even, undiluted coat using a wide mop or applicator. 4. When sufficiently hard to walk on, approximately one (1) hour, repeat the procedure crosswise. 5. Allow finish to dry for at least eight (8) hours after the second coat before use.

Notes: When applying the product, avoid strong sunlight and drafts. Turn off under floor heat before commencing work. Ensure sufficient ventilation.

Consumption: 1.3gallons = 1000 square feet (single coat). Coverage may vary depending on type of flooring material.

Recommended Cleaning & Maintenance: Dust mop or sweep then clean with a mop or automatic scrubber using Dr.Schutz Neutral Cleaner diluted according to product instructions.

Hilway Direct Floor Finish SDS