DuPont™ StoneTech® Professional Grout Sealer -Gallon

DuPont™ StoneTech® Professional Grout Sealer -Gallon
(Photo does not indicate actual bottle size.)

Heavy duty protection against most stains

Protects grout & makes cleaning easier

Natural look

Water-based, low-solids coating

Interior & exterior

For Use On:
Grout for natural stone, ceramic, and porcelain tile.

Directions For Use:
Note: Directions may vary depending on size.
Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings. Ensure that the surface temperature of the stone is between 50-80°F before sealing.
1. Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.
2. Liberally apply using a paint pad, low-pressure chemical-resistant sprayer, narrow roller or natural hairbrush, focusing on the grout joints.
3. Allow sealer to completely penetrate into the grout, 5-15 minutes.
4. Liberally apply a second coat following steps 2-3.
5. Wipe up all sealer from the surface of the tile. Use a clean, dry, lint-free, cotton towel or mop to remove excess sealer.
6. If sealer was not completely wiped off and a residue appears, wipe entire surface with a towel dampened with sealer. Use a white nylon pad to loosen residue and follow with a clean, white absorbent towel to remove.
7. A full cure is achieved after 24-48 hours; foot traffic may begin in 4 hours. Cover with red rosin paper, if foot traffic must resume before the recommended time periods have passed.
8. Clean equipment with water.

Coverage: 150-250 sq ft
Expected Wear: 3–5 years on interior surfaces and 1–3 years on exterior surfaces.

Related Products: Clean & maintain surface as needed with Revitalizer® Cleaner and Protector or Stone & Tile Cleaner.

Safety Data Sheet: StoneTech® Grout Sealer MSDS