DuPont StoneTech Enhancer Pro Stone Sealer - pint (ORMD)

DuPont StoneTech Enhancer Pro Stone Sealer

For Professional Use Only

Features and Benefits

ò Enriches color

ò Heavy duty protection against most stains

ò Solvent-based, interior & exterior applications

Where to Use

Natural stone such as limestone, slate, travertine, sandstone, flagstone, tumbled stone, flamed stone & textured stone. Masonry & concrete.

Directions

Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry, and free of waxes, coatings, and previous sealers. Before application, surface should dry for 24-72 hours. Surface temperature should be between 50¦F and 80¦F. Ensure that the area is well-ventilated during application and until the surface is dry to the touch. Keep children and pets out of the area until foot traffic resumes.

Mask off baseboards or adjacent areas.

1. Liberally apply an even coat using a paint pad, roller, brush, or pump-up garden sprayer. Do not use a power sprayer, towel, or sponge for application. Do not thin before using. Distribute sealer evenly over entire surface. Uneven penetration will result in blotchy appearance.

2. Allow sealer to penetrate surface for 15-20 minutes. Denser material may require more time to penetrate.

3. Thoroughly wipe surface with multiple dry cloths to remove all excess sealer. DO NOT ALLOW SEALER TO DRY ON SURFACE. Failure to remove sealer from surface may result in residue that may need to be mechanically removed.

4. A second coat may be needed for more absorbent surfaces. If darker appearance is required, sealer should be applied one hour after initial application, as directed in steps 1-3.

5. Full cure is achieved after 24-72 hours. Avoid foot traffic for 6-8 hours after application. If foot traffic must resume sooner, cover the floor with red rosin paper to protect it until full cure has been achieved. Red rosin paper is not needed to apply second coat.

6. Clean equipment with mineral spirits. Rags and equipment that are wet with product may be combustible. Clean up promptly after job is complete. Clean equipment with mineral spirits and allow to dry in a well-ventilated area. Allow rags to dry in a well-ventilated area out of reach of children and pets. When dry, dispose of in accordance with local waste disposal regulations. Note: Above instructions are for reference purposes only. Please follow label directions on back of actual product.

METHOD OF APPLICATION:

For small jobs, use a paint pad, roller, or brush. For larger jobs, use a pump-up garden sprayer available at your local garden center, hardware store, or home improvement center. Do not use a power sprayer. Power sprayers create a significant amount of overspray, resulting in wasted product and the need for additional clean-up. A pump-up garden sprayer will reduce the potential for over-exposure to vapors and produce better results.

Ensure that the area is well-ventilated during application and until the surface is dry to the touch. Keep children and pets out of the area until foot traffic resumes.

Coverage: Pint: 20-55 sq. ft.

Expected Wear: 3-5 years

Related Products To maintain your stoneÆs natural beauty, clean surface as needed with Revitalizer« Cleaner and Protector or Stone & Tile Cleaner.