Dr. Schutz Stripper - 5 Liter

Stripper Safety Data Sheet

Dr. Schutz Stripper is a special stripping agent for cleaning and stripping newly installed or heavily soiled vinyl, linoleum and rubber floors to remove the remains of old care products, stubborn dirt and adhesive residue. Low PH value makes Stripper suitable for vinyl, linoleum and rubber flooring.

Directions for Use:
Cleaning After Installation: Remove coarse dirt with a sweeping brush or vacuum cleaner. Dilute Stripper with water in a ratio of between 1:5 and 1:10. In case of particularly stubborn residues(e.g., in the commercial sector) use undiluted if required. For low levels of dirt adjust the strength of the solution as appropriate. Apply the cleaning solution to the floor area, distribute and allow to stand for approx. 10 minutes. Clean the floor surface using an automated scrubber, or scrubbing brush. Take up the loosened dirt with a mop or shop vac. Mop the floor with clear water until completely clean.
Coverage: 600-1000 square feet per 5 liter container

Stripping: Remove coarse dirt with a sweeping brush or vacuum cleaner. For domestic use, dilute Slipnomor Stripper in a ratio of 1:5 with water. In the commercial sector, use in concentrated form or diluted in a ratio of up to 1:3 (depending on the resistance of the protective film), spraying the floor with clear water before use if necessary. The method of procedure corresponds with that described in the previous paragraph the cleaning after installation, although it may be necessary to allow a standing time of 15-20 minutes.
Coverage:
Domestic Use: 1600-2500 square feet per 5 liter container
Commercial Use (Undiluted): 300-500 square feet per 5 liter container
Attention: Do not allow Stripper to dry out on the floor. For this reason, work in sections. Before stripping floor coverings (e.g., rubber flooring) check for colour and material fastness at an inconspicuous spot. If necessary, dilute Stripper even more and apply several times using a short standing time. Wear rubber gloves during use and ensure that the rooms to be treated are well ventilated. Do not spray sensitive surfaces (e.g., wood, metal, varnished surfaces) with the cleaning or stripping solution.

Store in a cool, dry place in, closed, original container. Keep locked up and out of the reach of children.