Butchers Amplify - Gallon

Butcher's Amplify is a high solids UHS floor finish that builds gloss with fewer coats than other finishes. One coat has the gloss of two coats. It applies easily and levels perfectly with no mop drag. Amplify has great mark resistance and durability. You can install up to five (5) coats in one night. Low odor finish is ideal for 24-hour facilities and it is excellent with spray buffing and burnishing.

Preparation:

* Always barricade area to be finished.

* Before the first application of Amplify High Solids Durable Finish, remove all old finish with any Butcher's stripper.

* Apply three (3) or more medium coats of Amplify High Solids Durable Finish with a clean finish mop or the JohnsonDiversey ProSpeed Floor Finish Applicator System. Let dry to the touch between coats. About 30 minutes.

* On porous resilient or stone floors, seal first with two (2) coats of Butcher's Iron Stone Seal.

Maintenance:

* Clean Daily: Dust mop. Then wet clean with Butcher's Sundance Raindance or Lancer cleaners in an automatic scrubber or with a damp mop.

* Spray buff as needed with Butcher's Speedtrack Cleaner. Apply Speedtrack Cleaner using an autoscrubber or damp mop, let floor dry and then burnish.

Recoating:

Clean thoroughly. Dust mop. Machine scrub with a floor machine or autoscrubber using a blue pad and Butcher's Hot Springs Cleaner at the recommended dilution. Rinse well and let dry.

* Apply two (2) new coats of Amplify High Solids Durable Finish.