Bona X Stone, Tile, & Laminate Floor Polish- 32oz

Bona X Hard Surface Stone, Tile, & Laminate Floor Polish is a quick drying formula that is a waterborne acrylic/urethane maintenance polish for hard surface floors.

For use on laminate flooring (such as Pergo), vinyl, ceramic tile, marble, granite and stone.

Bona hardsurface refresher contains UV & scratch protectants.

It provides a clear, highly durable gloss shine to hard surface floors that are dull, scratched or beginning to show signs of wear.

The refresher can be used on sealed hard surface flooring such as: laminate, vinyl, no-wax linoleum, terrazo, unglazed tile, stone and sealed porous marble. It also comes in a convenient 32oz squirt bottle.

Coverage: 500 to 750 sq ft per quart depending on floor texture and porosity.

Directions:

1. Vacuum, sweep or dust mop to remove loose dirt and grit from your floor. Clean floor thoroughly with Bona Swedish Formula Stone and laminate hardsurface floor cleaner.

2. Rock container back and forth several times before opening. Use the CREAM-COLORED Micro-plus Refresher Applicator pad attached to the 4x15 velcro microfiber mop base.

3. Prepare the applicator pad by slightly dampening it with water and thoroughly wringing it out.

4. Apply Hardsurface Floor Refresher in a 1" - 2" wide wavy line on the floor. Work on a small section at a time, about 3'x8'

5. Spread Bona hardsurface floor refresher over entire section making sure floor surface is completely covered. For best results apply a thin even, consistent coat.

6. Smooth out Bona Hard surface refresher to eliminate any remaining application marks. Continue the process in sections until the entire floor is coated. Allow area to dry a minimum of one hour. If a higher gloss level is desired, a second coat may be applied after two hours. Always coat entire floor to ensure an even appearance and sheen.

7. Avoid heavy traffic and replacement of furniture and rugs for 24 hours after final coat.

8. Clean tools with soap and water immediately after use. Rinse applicator thoroughly.

Notes: Do not use over any floor that has been waxed. Hardsurface refresher is not a cleaner. The application of hardsurface floor refresher to satin or low gloss sheens will increase the gloss level. Always do a test section first.