Armstrong SatinKeeper

Satinkeeper Low Gloss Floor Polish from Armstrong is for use on no-wax vinyl and linoleum floors with a low luster finish. It protects and renews the appearance of dulled or older resilient floors.

Armstrong Satinkeeper Floor Polish is designed to maintain the original Satin appearance of no-wax vinyl or linoleum floors only. It restores the floor to a satin gloss and protects worn or older floors even after repeated washings. use on higher gloss floors will result in a low gloss appearance.

Directions:

1. Sweep or vacuum floor thoroughly.

2. Wash with Armstrong Once 'n Done Floor Cleaner (not recommended for linoleum floors Use the Armstrong Linoleum Floor Cleaner), and then let dry.

3. Initial use requires two coats to be applied allow time for each coat to dry. Apply with a clean, damp sponge mop or wax applicator. Make sure the entire surface is coated. Dries in about 30 minutes --- no buffing necessary.

4. Reapply polish as needed --- 1 or 2 coats at a time. If necessary, remove with Armstrong New Beginning Deep Cleaning Floor Stripper. In high humidity areas, Satinkeeper may take longer than 30 minutes to dry.